Car Ghost Immobiliser
Ghost Immobiliser is a sophisticated system that prevents your vehicle from starting without an exclusive pin code sequence, inputted through existing buttons (such as those on the dashboard or on the steering wheel). car immobiliser ghost is inaccessible to thieves and operates quietly.
It can help to deter hotwiring as well as newer methods like relay thefts. You may also see an improvement in your insurance premium.
No Radio Frequencies
A car ghost immobiliser functions differently from a traditional immobiliser in that there is no radio frequency that is transmitted which prevents it from being hacked by thieves using a simple and readily available cloning device. This means that a ghost immobiliser won't stop your car from being started even if a burglar has successfully cloned your key or stolen it.
Ghost immobilisers are also effective against relay attacks. These involve amplifying the signal from your key fob to fool the system into allowing your car to start. The Ghost will recognize this and not start the vehicle until you enter the PIN code. This is a great method to deter thieves with a technological edge with access to low-cost and easy-to-use equipment to copy or steal your car.
The Ghost can also be fitted discretely (without causing any damage to your vehicle) and will only work once the correct pin sequence is entered. This will only be known by the owner who has installed it, which means that no one can use your vehicle unless they know your pin code. Some systems allow the proprietor to set up a valet or service mode, which permits the owner to let others use their vehicle without revealing their pin code. This will protect them from opportunistic thefts.
As well as being very user-friendly and simple to deactivate and disarm, the Ghost can be linked up with an auto tracker to make it possible for you to track your car. Some insurers offer discounts on insurance for vehicles with Ghosts installed. This is great news because it improves the security of your vehicle.
Although the Ghost immobiliser isn't Thatcham certified however, it is an aftermarket product that has been tested by an independent party and proved to be effective. Ask the seller of a secondhand vehicle with the Ghost installed if they can transfer it to your car. This will ensure that your new car is more secure than if the previous owner had not transferred it.
No Circuit Cuts
The absence of circuit cuts means that even in the event that your car is taken away, thieves will not be able to begin it. The thieves will need to know the exact buttons to unlock the vehicle and they won't be able to accomplish this without knowing these sequences. This will discourage thieves from attempting to steal.
If you have a GPS tracking device and you are using the Ghost can act as an anti-theft device. It can send a signal to activate a siren to warn the tracker about a theft attempt. This feature can be turned on at any time through your online dashboard.
When you connect your Ghost to the CAN data network it will identify your vehicle and the owner using the unique pin code you programmed during installation. This enables the device to directly communicate with the ECU of your vehicle and disable its engine. This means that only the car's owner, or someone with the PIN code, is able to start the engine.
Because the pin code is made from buttons that are within easy reach of the driver (such as cruise control and stereo mutes) it remains mathematically impossible to be guessed by potential thieves. Your engineer will present you with a Pin Code Override Card that is like scratch-off tickets from lottery. It only must be scratched to reveal the code.
In contrast to traditional immobilisers, which are usually identified by thieves using diagnostics to read the immobiliser relay, your Ghost is not detected by these methods as it doesn't utilize radio frequencies or circuit cuts. This makes it unaffected by the latest techniques used by organized gangs of thieves who specialise in RF scanning and code-grabbing technology. It is a product that lasts for a lifetime that can be easily removed from your vehicle if you decide to sell it. This means that you will not lose any of the security you've invested in.
No Key Fobs
In the UK, vehicle theft is on the rise. It is imperative to take proactive measures to protect your prized vehicles from criminals who are opportunistic. The revolutionary Ghost Immobiliser from Autowatch provides a strong defense against key cloning, hacking, and signal relay attacks. It is a discrete and highly effective security system for cars that is easy to install in a wide range of vehicles.
The Ghost immobiliser isn't a typical system that relies on key fobs. It also does not use signals relays. It is not affected by signal interception, and it cannot be activated using stolen or compromised remotes. It's also tamperproof and has no external wiring, making it difficult to take off or disable.
It shields you from key-long hacking as well as key theft by stopping your engine from starting until a specific PIN is entered. This is achieved by utilising existing buttons in the vehicle like those on the steering wheel as well as the door panels and the centre console to design a customised disarm sequence up to 20 presses (like entering a PIN on your smartphone).
This is the only method you have to start your engine and it only works if you have entered the correct pin code. This makes it hard for thieves to take your vehicle and is simple to use. Alternatively, if you're worried about losing the pin code, the installer will provide you with an emergency override driver fob which allows you to use your car in the same way as you normally would.
The absence of key fobs or LED indicators also means that the Ghost immobiliser cannot be identified by the diagnostic equipment or RF scanners used by thieves to identify the presence of a system. This method of installation is more stealthy and improves the effectiveness of the system, and permits it to be installed in a place that is difficult to steal.
Ghost immobilisers are a cheap and highly effective deterrent to theft. They also increase the value of your vehicle. They are also recognised by some insurance providers and may result in reduced costs.
No Damage
If your car is fitted with a ghost immobiliser, you can rest your assurance that your vehicle is protected against hacking, cloning and key fob theft, and other typical methods of theft. This is particularly important if you've put in a lot of money and time customizing your vehicle or have an uncommon or expensive model. Ghost immobilisers operate silently and require no additional components or installation.
The system lets you create a pin code that must be entered in order for the engine to begin. It is activated by buttons on your steering wheel or console, as well as on your door panels. You can alter the sequence at any time. This means that even if a person has your pin number, they cannot start your vehicle. It is also simple to turn off the device in an unservice valet mode to allow your car to be removed for cleaning, servicing or an MOT without being triggered.
The criminal won't be able to start your car when it's cloned and they'll be caught. The system also alerts you to any alteration to the wiring system of your vehicle, such as cutting or signal interception, and it can transmit this information to your smartphone which allows you to ensure that the security of your vehicle is intact at all times.
You may want to disable or remove the Ghost Immobiliser due to reasons such as for maintenance or for resales. In this situation you must be very careful to not harm the wiring of your vehicle. It is highly recommended that you wear safety gloves during this procedure, and utilize a flashlight to illuminate dark areas of your vehicle in which the immobiliser could be. You may also refer to any documentation you have, such as user manuals or installation instructions, to find the exact location of the device.
After the immobiliser has been disconnected from your vehicle's wiring system, you can reconnect the battery in your car and test to make sure that it functions correctly and that all electrical components are functioning according to their intended purpose. You should then insulate and join any wires that were cut using electrical tape or soldering where it is necessary. Be sure that there aren't any exposed wires and that any dangling cables are secured using zip ties or other suitable method. Then, schedule a inspection with a professional ensure that the removal process didn't harm any other systems in your car.